Accueil » The company » Quality

Quality

In order to guarantee our customers impeccable quality and to maintain a solid relationship of trust with them, ATE has several certifications and applies various quality management methods.

IATF 16949 CERTIFICATION

ATE is IATF 16949 certified since 2019. IATF 16949 is the international standard for quality management systems in the automotive industry. Developed by theIATF (International Automotive Task Force) in conjunction with European and American automotive manufacturers and suppliers, it enables us, among other things, to guarantee consistent quality of our products and services, reduce gaps and scrap in the supply chain and prevent non-conformities.

Download the certificate

ISO 14001 CERTIFICATION

ISO 14001 is an internationally recognised standard setting out the requirements for an environmental management system. It helps organisations to improve their environmental performance through more efficient use of resources and reduction of waste. It is part of the sustainable development framework and is based on a voluntary approach to continuous improvement. ATE has been ISO 14001 certified since 2018.

Download the certificate

ISO 45001 CERTIFICATION

ISO 45001 is the standard developed for organisations concerned with improving the safety of their employees, reducing risks in the workplace and creating better and safer working conditions.

Download the certificate

UL CERTIFICATION

UL certification provides assurance of product quality and safety. It is awarded by Underwriters Laboratories after a thorough analysis of the product to determine if it meets safety standards. Some of our products meet all of these criteria and are UL certified. The UL audit process was initiated in 2009.

Download the certificate

HD FLEXO CERTIFICATION

HD Flexo has quickly become the new standard in flexography. This digital printing plate process for printing forms provides unparalleled print quality in the flexo process. HD Flexo provides a wider colour gamut, finer gradations and sharper detail. This makes it possible for flexo printing to reach levels of quality and consistency close to offset and gravure printing. ATE has been HD Flexo certified since 2013.

Download the certificate

HALAL CERTIFICATION

ATE obtained Halal certification in April 2022. This guarantees that one of our products complies with the principles and rules of consumption prescribed by Islam.

Download the certificate

 

KOSHER CERTIFICATION

ATE obtained Kosher certification in January 2023. This proves that one of our products complies with Jewish beliefs.

Download the certificate

THE "3M PREFERRED CONVERTER" LABEL

In 2018, our company was trusted as a reference converter by our internationally renowned partner, the company 3M. Alsace Techniques Etiquetage is thus one of the 4 French companies to have received the “3M Preferred Converter” label, a guarantee of quality and trust that demonstrates our ability to offer solutions adapted to our customers.

ATE, TIER 1 SUPPLIER TO THE RENAULT NISSAN MITSUBISHI GROUP

In July 2018, ATE was recognised as a Tier 1 supplier to one of the biggest names in the automotive sector, the Renault Nissan Mitsubishi Group.

ATE, ISO 7 CLASSIFIED (ISO 14644-1)

Our production workshop has been classified ISO 7 (“grey room”) according to the ISO 14644-1 standard, just a few particles away from ISO 6 (“clean room”).

THE 5S METHOD

The 5S method allows for the continuous optimisation of working conditions and working time by ensuring the organisation, cleanliness and safety of a work area. It is a management technique that is part of our quality approach.

PRODUCTION UNDER FMECA

The FMEA method, or Failure Mode, Effect and Criticality Analysis, is a quality tool for preventive analysis that enables the identification and treatment of potential causes of defects and failures before they occur.

100% CAMERA INSPECTION

A 100% camera inspection with reporting of each production run can be offered to customers who so wish.

THE PPAP FILE

PPAP is a mandatory inspection process in the automotive industry. Designed to evaluate the supplier’s manufacturing capacity, it also allows us to know whether the supplier meets the quality requirements of its customers.

ATE, French flexibility combined with German rigour.

A family business with an international scope

  • 14,9 M€ of sales
in 2023

    14,9 M€ of sales
    in 2023

  • 3/4 realized 
at the export

    3/4 realized
    at the export

  • 295 active 
customers

    295 active
    customers

  • 22 countries 
supplied

    22 countries
    supplied

  • 69 employees

    69 employees

  • 6500 sqm 
production

    6500 sqm
    production

  • 700 raw 
materials

    700 raw
    materials

  • 40 machines

    40 machines